Device operation sequence
Computer software
1 Turn on the power. Turn on the PLC power after the main power is turned on. Turn the red main power switch in the middle of the left panel on the front of the SPI console clockwise to the "1" position
This article is an unauthorized grab from Experience
3 After the computer starts and enters the system normally, run the SPI detection software for testing. On your computer desktop, double-click the icon "TR7007i" with the left mouse button
4 When the login window appears, enter the account TR7007 password Enter TR7007 and click "Login.
5 After the software is started, click the "Open" option to access the required program. Click the "Detection" button below to use normally
6 Confirm that the SPI normal test board is bad, confirm according to the quality regulations, confirm that it is ok click good product (green), and really bad click bad (red).
7 Shut down the machine if it is not used for several days.
When using a double track, the landing method is the same
Shutdown is to first save the current program, close the SPI test software, and then the computer host. Finally turn off the main power supply of the device